The emergence of 4K displays marked the beginning of a new era in PC monitors market. Despite the unquestionable viewing facilities, those products so far remain beyond the budget for many customers. So, the development of more affordable but ultra-modern solutions is at the height today. Asus was always differentiated by offbeat approaches to the design and framework of all products. Hence, the appearance of MX299Q monitor was quite an expected move. This model is peculiar not only by an unusual ‘cine’ design but also by striking facilities. Let’s get proof of it.

• Intel Corporation Montevina Crb Driver For Mac
• Santa Rosa Crb Driver
• Intel Corporation Montevina Crb Driver For Macbook
• Intel Corporation Montevina Crb Driver For Macbook Pro

Successor to Montevina. Calpella, an unincorporated community in Mendocino County, California. 2008 Camino: Chipset Intel 820 chipset, used with the Pentium II, Pentium III, and Celeron processors. Camino, California. A small town in El Dorado County, California. Apple Hill is located in Camino. Jun 26, 2018  Hi phillipmoose, We understand that you're having issues with the Intel iwlmvm driver crashing in Ubuntu* on your NUC7i5BNB, we'll be glad to assist you. Based on our Intel Linux* wireless driver page, make sure that your distribution is running on kernel 4.6 or newer, as the Intel® Dual Band Wireless-AC 8265 has drivers beginning on this version of the kernel. Downloads for Boards and Kits. View by product. Mac OS* Description Type OS. And you will not receive email from Intel Corporation unless requested. Download drivers for Intel Corporation Cantiga & ICH9M Chipset based on Intel Corporation Montevina CRB Here you can download device drivers for Intel Corporation Cantiga & ICH9M Chipset based on Intel Corporation Montevina CRB. Intel has historically named integrated circuit (IC) development projects after geographical names of towns, rivers or mountains near the location of the Intel facility responsible for the IC. Intel Corporation Cantiga & ICH9M Chipset based on Intel Corporation Montevina CRB FUJITSU SIEMENS ESPRIMO Mobile M9410 based on FUJITSU SIEMENS M118DB FUJITSU SIEMENS ESPRIMO Mobile U9210 based on FUJITSU SIEMENS S118DB.

Specifications
Asus MX299Q boasts the following specifications:
— panel: type – AH-IPS (LM290WWI-SSAI), coverage – Hard Coating 3H (anti-glare), backlit – W-LED, diagonal – 29 inches, aspect ratio — 21:9, response time – 5 ms, resolution – 2560x1080, viewing angles – 178/178 degrees (H/V), brightness – 300 cd/m2, number of displayed colors – 16.7 m, contrast – 1000:1/80M:1 … PermalinkBrowse files

Shamu: Update Linux 3.10.43 ~> 3.10.63

What's New: Provides the optimal gaming experience with support for the Windows 10 October 2018 Update including the public release of DirectX Raytracing (DXR). Prior to a new title launching, our driver team is working up until the last minute to ensure every performance tweak and bug fix possible makes it into the Game Ready driver. Geforce gt 720 drivers for mac. As a result, you can be sure you’ll have the best day-1 gaming experience for your favorite new titles.

Nec dv 5700b drivers for mac. You must install at least one memory bank to ensure normal operation. Foxconn GZ7MC-KS2H Specs – CNET Match the CPU triangle marker to Pin foxconn 945gz7mc position as shown below.

• Loading branch information..

Intel Corporation Montevina Crb Driver For Mac

@@ -195,7 +195,7 @@ DVB_DOCUMENTED =

#

install_media_images =

$(Q)cp $(OBJIMGFILES)$(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api

$(Q)-cp $(OBJIMGFILES)$(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api

$(MEDIA_OBJ_DIR)/%: $(MEDIA_SRC_DIR)/%.b64

$(Q)base64 -d $<>$@

@@ -131,6 +131,20 @@ If you cannot condense your patch set into a smaller set of patches,

then only post say 15 or so at a time and wait for review and integration.

If your patch fixes a bug in a specific commit, e.g. you found an issue using

git-bisect, please use the 'Fixes:' tag with the first 12 characters of the

SHA-1 ID, and the one line summary.

Example:

Fixes: e21d2170f366 ('video: remove unnecessary platform_set_drvdata()')

The following git-config settings can be used to add a pretty format for

outputting the above style in the git log or git show commands

[core]

abbrev = 12

[pretty]

fixes = Fixes: %h ('%s')

4) Style check your changes.

@@ -420,7 +434,7 @@ person it names. This tag documents that potentially interested parties

have been included in the discussion

14) Using Reported-by:, Tested-by:, Reviewed-by: and Suggested-by:

14) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes:

If this patch fixes a problem reported by somebody else, consider adding a

Reported-by: tag to credit the reporter for their contribution. Please

@@ -475,6 +489,12 @@ idea was not posted in a public forum. That said, if we diligently credit our

idea reporters, they will, hopefully, be inspired to help us again in the

future.

A Fixes: tag indicates that the patch fixes an issue in a previous commit. It

is used to make it easy to determine where a bug originated, which can help

review a bug fix. This tag also assists the stable kernel team in determining

which stable kernel versions should receive your fix. This is the preferred

method for indicating a bug fixed by the patch. See #2 above for more details.

15) The canonical patch format

@@ -0,0 +1,164 @@

LZO stream format as understood by Linux's LZO decompressor

Introduction

This is not a specification. No specification seems to be publicly available

for the LZO stream format. This document describes what input format the LZO

decompressor as implemented in the Linux kernel understands. The file subject

of this analysis is lib/lzo/lzo1x_decompress_safe.c. No analysis was made on

the compressor nor on any other implementations though it seems likely that

the format matches the standard one. The purpose of this document is to

better understand what the code does in order to propose more efficient fixes

for future bug reports.

Description

The stream is composed of a series of instructions, operands, and data. The

instructions consist in a few bits representing an opcode, and bits forming

the operands for the instruction, whose size and position depend on the

opcode and on the number of literals copied by previous instruction. The

operands are used to indicate :

- a distance when copying data from the dictionary (past output buffer)

- a length (number of bytes to copy from dictionary)

- the number of literals to copy, which is retained in variable 'state'

as a piece of information for next instructions.

Optionally depending on the opcode and operands, extra data may follow. These

extra data can be a complement for the operand (eg: a length or a distance

encoded on larger values), or a literal to be copied to the output buffer.

The first byte of the block follows a different encoding from other bytes, it

seems to be optimized for literal use only, since there is no dictionary yet

prior to that byte.

Lengths are always encoded on a variable size starting with a small number

of bits in the operand. If the number of bits isn't enough to represent the

length, up to 255 may be added in increments by consuming more bytes with a

rate of at most 255 per extra byte (thus the compression ratio cannot exceed

around 255:1). The variable length encoding using #bits is always the same :

length = byte & ((1 << #bits) - 1)

if (!length) {

length = ((1 << #bits) - 1)

length += 255*(number of zero bytes)

length += first-non-zero-byte

}

length += constant (generally 2 or 3)

For references to the dictionary, distances are relative to the output

pointer. Distances are encoded using very few bits belonging to certain

ranges, resulting in multiple copy instructions using different encodings.

Certain encodings involve one extra byte, others involve two extra bytes

forming a little-endian 16-bit quantity (marked LE16 below).

After any instruction except the large literal copy, 0, 1, 2 or 3 literals

are copied before starting the next instruction. The number of literals that

were copied may change the meaning and behaviour of the next instruction. In

practice, only one instruction needs to know whether 0, less than 4, or more

literals were copied. This is the information stored in the <state> variable

in this implementation. This number of immediate literals to be copied is

generally encoded in the last two bits of the instruction but may also be

taken from the last two bits of an extra operand (eg: distance).

End of stream is declared when a block copy of distance 0 is seen. Only one

instruction may encode this distance (0001HLLL), it takes one LE16 operand

for the distance, thus requiring 3 bytes.

IMPORTANT NOTE : in the code some length checks are missing because certain

instructions are called under the assumption that a certain number of bytes

follow because it has already been garanteed before parsing the instructions.

They just have to 'refill' this credit if they consume extra bytes. This is

an implementation design choice independant on the algorithm or encoding.

Byte sequences

First byte encoding :

0.17 : follow regular instruction encoding, see below. It is worth

noting that codes 16 and 17 will represent a block copy from

the dictionary which is empty, and that they will always be

invalid at this place.

18.21 : copy 0.3 literals

state = (byte - 17) = 0.3 [ copy <state> literals ]

skip byte

22.255 : copy literal string

length = (byte - 17) = 4.238

state = 4 [ don't copy extra literals ]

skip byte

Instruction encoding :

0 0 0 0 X X X X (0.15)

Depends on the number of literals copied by the last instruction.

If last instruction did not copy any literal (state 0), this

encoding will be a copy of 4 or more literal, and must be interpreted

like this :

0 0 0 0 L L L L (0.15) : copy long literal string

length = 3 + (L ?: 15 + (zero_bytes * 255) + non_zero_byte)

state = 4 (no extra literals are copied)

If last instruction used to copy between 1 to 3 literals (encoded in

the instruction's opcode or distance), the instruction is a copy of a

2-byte block from the dictionary within a 1kB distance. It is worth

noting that this instruction provides little savings since it uses 2

bytes to encode a copy of 2 other bytes but it encodes the number of

following literals for free. It must be interpreted like this :

0 0 0 0 D D S S (0.15) : copy 2 bytes from <= 1kB distance

length = 2

state = S (copy S literals after this block)

Always followed by exactly one byte : H H H H H H H H

distance = (H << 2) + D + 1

If last instruction used to copy 4 or more literals (as detected by

state 4), the instruction becomes a copy of a 3-byte block from the

dictionary from a 2.3kB distance, and must be interpreted like this :

0 0 0 0 D D S S (0.15) : copy 3 bytes from 2.3 kB distance

length = 3

state = S (copy S literals after this block)

Always followed by exactly one byte : H H H H H H H H

distance = (H << 2) + D + 2049

0 0 0 1 H L L L (16.31)

Copy of a block within 16.48kB distance (preferably less than 10B)

length = 2 + (L ?: 7 + (zero_bytes * 255) + non_zero_byte)

Always followed by exactly one LE16 : D D D D D D D D : D D D D D D S S

distance = 16384 + (H << 14) + D

state = S (copy S literals after this block)

End of stream is reached if distance 16384

0 0 1 L L L L L (32.63)

Copy of small block within 16kB distance (preferably less than 34B)

length = 2 + (L ?: 31 + (zero_bytes * 255) + non_zero_byte)

Always followed by exactly one LE16 : D D D D D D D D : D D D D D D S S

distance = D + 1

state = S (copy S literals after this block)

0 1 L D D D S S (64.127)

Copy 3-4 bytes from block within 2kB distance

state = S (copy S literals after this block)

length = 3 + L

Always followed by exactly one byte : H H H H H H H H

distance = (H << 3) + D + 1

1 L L D D D S S (128.255)

Copy 5-8 bytes from block within 2kB distance

state = S (copy S literals after this block)

length = 5 + L

Always followed by exactly one byte : H H H H H H H H

distance = (H << 3) + D + 1

Authors

This document was written by Willy Tarreau <w@1wt.eu> on 2014/07/19 during an

analysis of the decompression code available in Linux 3.16-rc5. The code is

tricky, it is possible that this document contains mistakes or that a few

corner cases were overlooked. In any case, please report any doubt, fix, or

proposed updates to the author(s) so that the document can be updated.

@@ -2026,8 +2026,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.

-------------------

Module for sound cards based on the Asus AV66/AV100/AV200 chips,

i.e., Xonar D1, DX, D2, D2X, DS, Essence ST (Deluxe), Essence STX,

HDAV1.3 (Deluxe), and HDAV1.3 Slim.

i.e., Xonar D1, DX, D2, D2X, DS, DSX, Essence ST (Deluxe),

Essence STX (II), HDAV1.3 (Deluxe), and HDAV1.3 Slim.

This module supports autoprobe and multiple cards.

Santa Rosa Crb Driver

@@ -29,6 +29,9 @@ Rules on what kind of patches are accepted, and which ones are not, into the

Procedure for submitting patches to the -stable tree:

- If the patch covers files in net/ or drivers/net please follow netdev stable

submission guidelines as described in

Documentation/networking/netdev-FAQ.txt

- Send the patch, after verifying that it follows the above rules, to

stable@vger.kernel.org. You must note the upstream commit ID in the

changelog of your submission, as well as the kernel version you wish

@@ -463,6 +463,32 @@ This file shows up if CONFIG_DEBUG_STACKOVERFLOW is enabled.

perf_cpu_time_max_percent:

Hints to the kernel how much CPU time it should be allowed to

use to handle perf sampling events. If the perf subsystem

is informed that its samples are exceeding this limit, it

will drop its sampling frequency to attempt to reduce its CPU

usage.

Some perf sampling happens in NMIs. If these samples

unexpectedly take too long to execute, the NMIs can become

stacked up next to each other so much that nothing else is

allowed to execute.

0: disable the mechanism. Do not monitor or correct perf's

sampling rate no matter how CPU time it takes.

1-100: attempt to throttle perf's sample rate to this

percentage of CPU. Note: the kernel calculates an

'expected' length of each sample event. 100 here means

100% of that expected length. Even if this is set to

100, you may still see sample throttling if this

length is exceeded. Set to 0 if you truly do not care

how much CPU is consumed.

pid_max:

@@ -12,6 +12,8 @@ ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space

ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole

ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)

.. unused hole ..

ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks

.. unused hole ..

ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0

ffffffffa0000000 - ffffffffff5fffff (=1525 MB) module mapping space

ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls

@@ -1,6 +1,6 @@

VERSION = 3

PATCHLEVEL = 10

SUBLEVEL = 42

SUBLEVEL = 63

EXTRAVERSION =

NAME = TOSSUG Baby Fish

@@ -626,6 +626,8 @@ KBUILD_CFLAGS += -fomit-frame-pointer

endif

endif

KBUILD_CFLAGS += $(call cc-option, -fno-var-tracking-assignments)

ifdefCONFIG_DEBUG_INFO

KBUILD_CFLAGS += -g

KBUILD_AFLAGS += -gdwarf-2

@@ -89,8 +89,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr,

conststruct exception_table_entry *fixup;

int fault, si_code = SEGV_MAPERR;

siginfo_t info;

unsignedint flags = (FAULT_FLAG_ALLOW_RETRY FAULT_FLAG_KILLABLE

(cause > 0 ? FAULT_FLAG_WRITE : 0));

unsignedint flags = FAULT_FLAG_ALLOW_RETRY FAULT_FLAG_KILLABLE;

/* As of EV6, a load into $31/$f31 is a prefetch, and never faults

(or is suppressed by the PALcode). Support that for older CPUs

@@ -115,7 +114,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr,

if (address >= TASK_SIZE)

goto vmalloc_fault;

#endif

if (user_mode(regs))

flags = FAULT_FLAG_USER;

retry:

down_read(&mm->mmap_sem);

vma = find_vma(mm, address);

@@ -142,6 +142,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr,

} else {

if (!(vma->vm_flags & VM_WRITE))

goto bad_area;

flags = FAULT_FLAG_WRITE;

}

/* If for any reason at all we couldn't handle the fault,

Intel Corporation Montevina Crb Driver For Macbook

@@ -20,7 +20,7 @@

/* this is for console on PGU */

/* bootargs = 'console=tty0 consoleblank=0'; */

/* this is for console on serial */

bootargs = 'earlycon=uart8250,mmio32,0xc0000000,115200n8 console=ttyS0,115200n8 consoleblank=0 debug';

bootargs = 'earlycon=uart8250,mmio32,0xc0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug';

};

aliases {

Intel Corporation Montevina Crb Driver For Macbook Pro

@@ -19,7 +19,7 @@

* register API yet */

#undef DBG_MAX_REG_NUM

#defineGDB_MAX_REGS39

#defineGDB_MAX_REGS87

#defineBREAK_INSTR_SIZE2

#defineCACHE_FLUSH_IS_SAFE1

@@ -33,23 +33,27 @@ static inline void arch_kgdb_breakpoint(void)

externvoidkgdb_trap(struct pt_regs *regs, int param);

enum arc700_linux_regnums {

/* This is the numbering of registers according to the GDB. See GDB's

* arc-tdep.h for details.

*

* Registers are ordered for GDB 7.5. It is incompatible with GDB 6.8. */

enum arc_linux_regnums {

_R0 = 0,

_R1, _R2, _R3, _R4, _R5, _R6, _R7, _R8, _R9, _R10, _R11, _R12, _R13,

_R14, _R15, _R16, _R17, _R18, _R19, _R20, _R21, _R22, _R23, _R24,

_R25, _R26,

_BTA = 27,

_LP_START = 28,

_LP_END = 29,

_LP_COUNT = 30,

_STATUS32 = 31,

_BLINK = 32,

_FP = 33,

__SP = 34,

_EFA = 35,

_RET = 36,

_ORIG_R8 = 37,

_STOP_PC = 38

_FP = 27,

__SP = 28,

_R30 = 30,

_BLINK = 31,

_LP_COUNT = 60,

_STOP_PC = 64,

_RET = 64,

_LP_START = 65,

_LP_END = 66,

_STATUS32 = 67,

_ECR = 76,

_BTA = 82,

};

#else

@@ -11,6 +11,7 @@

#ifndef _UAPI__ASM_ARC_PTRACE_H

#define_UAPI__ASM_ARC_PTRACE_H

#definePTRACE_GET_THREAD_AREA25

#ifndef __ASSEMBLY__

/*