27.11.2019
Amd Hd 7770 Driver For Mac
Amd Hd 7770 2gb
Similar Content
- By tonyx86I was inspired by @duduclx post for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5. Everything works perfectly except for sleep. I'm starting this thread hoping to help others install Mojave on their E6410s and to diagnose and resolve the sleep issue. This thread is not currently intended to be an installation guide and is better suited to the intermediate/advanced hackintosher. Eventually, it may evolve into a guide.
I started with this thread and ended up with the system captured in the attached files. The keys were to change the LPCB._DSM.Name to '3b09' and remove all CLOVER configs not necessary for Mojave, plus some other items mentioned below.
My system is as follows:
Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.6 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name 'pci8086,3b09') Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the 'Refined ALPS Touchpad' version - release 5, not the original version), USBInjectAll (with custom SSDT-UIAC) Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961
Configuration items that may be different from what you have seen in other E6410 configurations
LPCB._DSM patched with device-id '3b09' AND 'name', 'pci8086,3b09' for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id '0a29' so that AppleGraphicsPowerManagement loads No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)
What is NOT working:
Sleep is not working with the files attached to this first post, but I have found the solution for sleep/wake. Read Known Issues below. Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings. The slider appears in Display settings (because of the backlight DSDT injection in AGP.VID._DSM), but the slider doesn't work (yet). Haven't spent time to figure this out, but would love help. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
What is NOT tested:
SD Card Slot Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS)
What IS working:
Everything else not mentioned above. Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar). Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to 'IOHDACodecFunction timeout.' Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP. Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: here) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter) Camera
Known issues and their solutions
AAPL,clock-id and device_type do not appear in IORegistry for EHC1. Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2. This has been completed and tested, but does not fix the sleep behavior. This fix is not reflected in the attached files. ALPS trackpad performance is not good with the 'standard' VoodooPS2Controller.kext that I initially used. Switching to the 'Refined ALPS TouchPad driver' is a big improvement. I've implemented and tested this on my system. The ALPS version of VoodooPS2Controller.kext mixes up a few keys. Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European. The updated VoodooPS2Controller.kext is not reflected in the attached files. This proposed configuration uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load. While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m). This AGPM method is discussed later in this thread. I have briefly tested this 'FakeSMC.kext method' for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior and have not updated attached files to reflect this change. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer). It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra. If I 'Inject NVidia' via CLOVER, IOHWControl loads properly. I have made this change and am testing it on my system, but have not updated the attached configuration files. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT). In the method, the expression If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS. I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS. While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17. Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The DSDT patch that duduclx refers to as 'Intel GMA Ready' in his El Capitan Guide is not applied correctly to the DSDT attached to this post. Somehow, the contents of patched _DSM are located in the PCI0.VID device instead of in Method (_DSM) within the PCI0.VID device. MaciASL didn't complain about this, so it went unnoticed, but it doesn't appear to have had any affect. I have completely removed this 'Intel GMA Ready' patch from my DSDT since it is not necessary for Dell Latitude E6410's with NVidia 3100m, but have not updated the attached DSDT. The assigned value of ACOS in the DSDT is conditional on the operating system. There is no condition for 'Darwin.' The solution is to add a condition for 'Darwin' (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc), analogous to the assignment of OSYS. I made this change in my DSDT (not yet reflected in the attached files), but have not observed any behavioral differences (sleep or otherwise). EDIT: Another way to handle this might be to override _OSI with XOSI (defined in a custom SSDT). Still learning about XOSI and haven't yet drawn a conclusion. I'm currently experimenting with ACOS and OSYS equivalent to Win7 and Linux (manually patched in my DSDT which has not yet been updated as a new attachment to this post). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port. I believe that this should be an internal USB port (portType=2). My custom SSDT-UIAC.dsl is wrong. I just learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs. The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15. I have not attached an updated SSDT-UIAC.aml to this first post, but my current EFI includes an updated SSDT-UIAC.aml with ports HP15, 16 17 and 18 set to internal (portType = 2). This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working. There are minor differences between a real MacBookPro6,2 IORegistry dump and this HackBookPro6,2 IORegistry dump that can be resolved with simple DSDT edits. I am now running with these changes, but haven't found these changes to make any difference in operational behavior. These changes are not reflected in the attached DSDT.
Rename Device (AC) -> Device (ADP1) Remove UID from Device (HPET) Add compatible ID 'PNP0C01' to Device (HPET) Change ADP1:_STA from 0x0F to 0xFFFFFFFF Enable Ambient Light Sensor and renamed to Device (ALS0) from Device (ALS) Add compatible ID 'smc-als' to ALS0 Rename LID -> LID0 Change 'name' definitions to Buffers in _DSM methods Rename Device (PBTN) to PWRB Rename Device (SBTN) to (SLPB) Change HDAU.hda-gfx from 'onboard-1' to 'onboard-2' Change GFX0.hda-gfx from 'onboard-1' to 'onboard-2' Sleep / Wake does not work with the basic DSDT edits. I have discovered that Sleep / Wake can be made to work by adding discrete graphics _OFF() and _ON() methods to _PTS and _WAK methods respectively (borrowed the concept and code from a working E6430 DSDT: Credit here: https://osxlatitude.com/forums/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/page/6/. I currently have sleep working on my Latitude E6410 and am continuing to test it. The solution is documented later in this thread, but files are not yet attached to this first post.
Brief Installation Guide (for the experienced Hackintosher):
Follow duduclx's guide for BIOS config Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD. When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext. Also, do not install the DosDude SIP kext (you're using CLOVER to manage SIP). Install the following kexts in /Library/Extensions: ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the 'Refined ALPS Touchpad driver,' not the original) Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys). Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the '1' (one) key. Install VoodooHDA Install HWMonitor application
Tips for Improved Performance (on this and other older systems)
System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check 'Reduce motion' System Preferences > Accessibility > Display: Check 'Reduce transparency'
Other tips
If your fan is always running and temps are good, try pressing Fn + z
CLOVER.zip - By takeawaydaveRunning Mojave 10.14.6 (18G95) on a Dell Precision 7510 and trying to get all framebuffers working properly.
The following CPU is being used: https://ark.intel.com/content/www/us/en/ark/products/89608/intel-xeon-processor-e3-1505m-v5-8m-cache-2-80-ghz.html
The actual Device ID of the iGPU is 0x191D.
There are the following graphical outputs:
mDP
HDMI
Thunderbolt
Clover 5058 (update to date at time of writing) is being used and up to date versions of Lilu 1.38, WEG 1.3.1
Till now I've been running with the following config:
with Model Name: MacBookPro13,3
When using 191B:
LDVS - Ok
HDMI (no audio) : 1920x1080
Thunderbolt (no audio) : 3440 x 1440
no mDP
191B-config-ioreg.zip is attached.
When using 1912:
No LDVS (as expected since this arrangement is targeted for iMac17,1
HDMI (with audio): 1920 x 1080
Thunderbolt (with audio) : 3440 x 1440
no mDP
1912-config-ioreg.zip attached
Question:
How can I get audio working as with 1912 on the 191B laptop config ? - By shinho73Can someone help me fix reboot issue? Actually it reboots, but sometimes the hackintosh just hangs with screen off. Here is the Extra folder containing org.chameleon.boot.plist. https://drive.google.com/drive/folders/1MX8-DpQk9kaRUfjPcToxf-ElWh-bN6EY?usp=sharing and the spec of the PC. https://drive.google.com/drive/folders/1NlcUNK5DBzJFxeFeuyt92eRjQqwO5T32?usp=sharing Can someone look at it? I might be doing something wrong. Any help will be greatly appreciated. Thank you.
- By ludufreInstalling macOS Mojave 10.14.6 on Gigabyte Z370N WIFI + i7 8700K + UHD 630
Changelog:
09/01/2019 15:57h GMT-0
- Updated to 10.14.6.
06/10/2019 00:44h GMT-0
- Completely rewritten.
10/17/2018 08:12h GMT-0
- Fix Kexts permissions commands adjusted.
- Removed FrameBuffer patch that is not needed.
- Added audio solution and HDMI.
- Unfortunately DisplayPort does not work.
- Replaced Wifi/BT with DW1560 (BCM94352Z)
10/11/2018 04:15h GMT-0
- Added USB 3.0 patch.
- Adjusted some steps.
- Changed text formatting.
10/11/2018 03:42h GMT-0
- Added missing UEFI configuration.
10/07/2018 00:36h GMT-0
- First version.
What works and what does not
- Processor: Intel Core i7-8700K -> Work. All SpeedStep stages.
- Video Card: Intel UHD 630 -> Work. QE/CI and Metal.
- Chipset: Intel Z370 -> Work.
- HDMI 2.0 (1st) -> Work.
- HDMI (2nd) -> Work.
- DP -> Not tested yet.
- Audio: ALC1220 -> Work.
- HDMI Audio -> Work.
- WiFi/Bluetooth -> Not work. Replaced with BCM94360CS2.
- Ethernet (1st) -> Work.
- Ethernet (2nd) -> Work.
- USB3.0 -> Work.
- Sleep -> Work.
- Airdrop, Handoff, Instant Hotspot and Continuity -> Work after replaced wireless.
Todo
- Make audio work.
- Make HDMI audio work.
- Test DisplayPort.
- Make second ethernet work.
- Replace Wifi/Bluetooth.
- Test DP.
What you need to install
- Running install of macOS
- One USB flash drive of 8GB or bigger
- macOS Mojave install app
- Clover Configurator
- Clover EFI
- Clover Configurator
- Some KEXTs and SSDT patches
How create create the install flash drive
Prepare install flash drive
Format the flash drive with GUID partition mapping and name it 'Install'.
- Open Disk Utility.
- Click in View, then 'Show All Devices'.
- Select the destination flash drive, then Erase.
- Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
Create install flash drive
Open terminal and run this command:
sudo /Applications/Install macOS Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction This will take about 30 minute s. / 8 minutes with USB 3.0
Install bootloader
Download the CloverEFI (used 5058, from Automated Clover Builds) and install with this options on 'Install macOS Mojave':
- Install for UEFI booting only
- Install Clover in the ESP
- UEFI Drivers - Recommended drivers (check all)
- UEFI Drivers - Human Interface Devices (check all)
- UEFI Drivers - FileVault 2 UEFI Drivers (check all, If you are going to use FileVault)
- UEFI Drivers - Additional drivers - NvmExpressDxe (if you are going to use NVMe)
Make things works
We'll make a full working flash drive, so follow these instructions:
Will be mounted the EFI partition of the flash drive.
Open the the /Volumes/EFI/CLOVER/config.plist inside this new partition with Clover Configurator (used 5.5.0.0)
Important modifications
config.plist
ACPI Page
- Check: SSDT - PluginType
BOOT Page
- Add: Arguments - darkwake=2
- Check: Legacy - XMPDetection=Yes
KERNEL AND KEXT PATCHES Page
- Check: KernelPm
RT VARIABLES Page
- Change: CsrActiveConfig - 0x3E7
SMBIOS Page
- Change: Macmini8,1 - Mac mini (Late 2018) Intel Core i7-8700B @ 3.20 GHz
- Click: Generate New (few times in the two buttons)
Need some Kexts in the folder /EFI/CLOVER/kexts/Other/
- Download the HWSensors 3 from here. I used the FakeSMC.kext, ACPIMonitor.kext, ITEIT87x.kext and IntelCPUMonitor.kext inside of DMG version r240.
- Download the Lilu.kext from here. I used the version 1.3.8.
Intel UHD 630
ACPI Page
- Uncheck: Fixes - AddHDMI
- Uncheck: Fixes - FixDisplay
- Uncheck: Fixes - FixHDA
GUI Page
- Change: Screen Resolution - 3840x2160 (My monitor is 4K)
Need a Kext in the folder /EFI/CLOVER/kexts/Other/
- Download the WhateverGreen.kext from here. I used the version 1.3.1.
Audio ALC 1220 and HDMI audio
BOOT Page
- Add: Arguments - alcid=11
DEVICES Page
- Change: Audio - Inject - 11
- Uncheck: Audio - AFGLowPowerState
- Uncheck: Audio - ResetHDA
Need a Kext in the folder /EFI/CLOVER/kexts/Other/
- Download the AppleALC.kext from here. I used the version 1.4.0.
All USBs (2.0, 3.0, Type-C, internal)
KERNEL AND KEXT PATCHES Page - KextsToPatch
- Name*: com.apple.iokit.IOUSBHostFamily
- Find* [HEX]: 83FB0F0F
- Replace* [HEX]: 83FB3F0F
- Comment: USB Port Limit Patch 1 PMHeart/DalianSky
- MatchOS: 10.14.x
- Name*: com.apple.iokit.IOUSBHostFamily
- Find* [HEX]: 83FB0F0F
- Replace* [HEX]: 83FB3F0F
- Comment: USB Port Limit Patch 2 PMHeart/DalianSky
- MatchOS: 10.14.x
- Name*: com.apple.driver.usb.AppleUSBXHCI
- Find* [HEX]: 83FB0F0F
- Replace* [HEX]: 83FB3F0F
- Comment: USB Port Limit Patch 3 PMHeart/DalianSky
- MatchOS: 10.14.x
- Name*: com.apple.driver.usb.AppleUSBXHCI
- Find* [HEX]: 83FF0F0F
- Replace* [HEX]: 83FF3F0F
- Comment: USB Port Limit Patch 4 PMHeart/DalianSky
- MatchOS: 10.14.x
Need a Kext in the folder /EFI/CLOVER/kexts/Other/
- Download the USBInjectAll.kext from here. I used the version 2018-1108.
Need SSDT patch in the folder /EFI/CLOVER/ACPI/patched/
- Download the SSDT-EC.aml, SSDT-UIAC.aml and SSDT-USBX attached bellow.
Wifi and Bluetooth (BCM94360CS)
Works out of box (plug 'n' play).
LAN Cards
Need a Kext for feach card in the folder /EFI/CLOVER/kexts/Other/
- Download the IntelMausiEthrenet.kext from here. I used the version 2018-1031.
- Download the SmallTreeIntel82576.kext attached bellow. I do not remember where I found it.
Now you can start the instalation without problem (I guess).
How install
UEFI Setup Configuration and Installation
UEFI configuration
- Shutdown and insert the flash.
- Power on with DEL pressed to enter BIOS setup.
- Change value: Periphelrals - Initial Display to IGP
- Change value: Periphelrals - USB Configuration - XHCI Hand-off to ENABLE
- Change value: Chipset - VT-d to DISABLE
- Change value: Chipset - Internal Graphics to ENABLE
- Change value: Chipset - DVMT Pre-Allocated to 128M
- Save & Exit Setup
- Now, hold the F12
- In the list, select your flash drive.
- It will show twice. One with UEFI prefix and another without.
- Select with UEFI prefix. Ie.: 'UEFI: Sandisk Cruzer'
The installer will start.
Format destination disk
Format the disk with GUID partition mapping and name it 'HD'.
- Select Disk Utility in the list, then press Continue.
- Click in View, then 'Show All Devices'.
- Select the destination Disk, then Erase.
- Name: HD, Format: APFS and Scheme: GUID Partition Map
Close Disk Utility.
Select 'Install macOS', then Continue.
Follow instructions in screen.
After install
After first part install the system will reboot.
The second part of the installation will begin. This will take 16 minutes.
Post installation
Install bootloader
When the second part of install finish, the system will reboot again.
After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.
Open the Clover installer inside flash drive that you copied before.
Use same options above but choose the system partition this time.
Now you need to replace the EFI folder inside your destination disk EFI parittion, with EFI folder inside flash card EFI partition.
If the flash drive EFI partition of your destination disk or flash drive is unmounted:
Mount with terminal 'sudo diskutil mount /dev/rdiskXs1'. To know what X is, use 'diskutil list', most likely is 0 for destination disk and 1 for flash drive.
Then, eject the flash drive.
Last step
Move all Kexts from EFI partition to /Library/Extensions, with those commands in Terminal:
sudo cp -R /Volumes/EFI/EFI/CLOVER/kexts/10.14/* /Library/Extensions/sudo chmod -R 755 /Library/Extensionssudo chown -R root:wheel /Library/Extensionssudo kextcache -i / Restart the system.
It's done!
Updates
System update 10.14.6
- Download and open latest CloverConfigurator
- Open Mount EFI and click in Mount Partition in EFI Partitions list
- Click in Open Partition that appears
- Go to EFI -> CLOVER
- Backup config.plist and ACPI folder to desktop
- Go back and delete CLOVER folder
(If you restart now you can't boot in macOS - DON'T RESTART)
- Download latest Clover and install (link and config above)
- Replace config.plist and ACPI folder from your desktop
- Update Lilu.kext, AppleALC.kext, WhateverGreen.kext, HWSensors kexts (FakeSMC, ACPIMonitor, IntelCPUMonitor, ITEIT87x) in /Library/Extensions/
- Run:
sudo chmod -R 755 /Library/Extensionssudo chown -R root:wheel /Library/Extensionssudo kextcache -i /
- Install macOS Update 10.14.6 and restart
And last but not least
I would like to thank the following community members, by making these dream possible:
@crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.
Z370N-WIFI v2.zip - By dugajimiSalve ragazzi,
vi scrivo dal mio nuovo Dell XPS 15 9570 e ovviamente sono pronto per il trapianto di cervello.
Prima di iniziare però qualche delucidazione.
Volendo realizzare un Dual boot win10 + macos:
Devo per forza formattare l'hd e reistallare anche windows 10 oppure posso ridimensionare la partizione Se si quale sistema operativo istallo per primo?
Dugajimi
Amd Hd 7770 Driver
Home » AMD Radeon HD 7770 Use the links on this page to download the latest version of AMD Radeon HD 7770 drivers. All drivers available for download have been scanned by antivirus program. Here is the list of AMD Radeon HD 7770 Graphics Drivers we have for you. To Download AMD Radeon HD 7770 Graphics Drivers you should Download Our Driver Software of Driver Navigator. Then you can download and update drivers automatic.
Wp5540 driver for mac. Hi, this is Erik Thau-Knudsen (from Silkeborg, Denmark, by the way) back again. Some googling brought me to the Mac OS X file itself, located at On the download page you can find device drivers, written for the following operating systems: • Microsoft Windows 98 • Microsoft Windows ME • Microsoft Windows NT • Microsoft Windows 2000 • Microsoft Windows XP • Microsoft Windows XP64 • Microsoft Windows Vista • Apple Macintosh OS 9 • Apple Macintosh OS X Thank you for your tips, notably about the manufacturer. Erik Thau-Knudsen Jul 08, 2008|. The problem was with the local importer (AGK Nordic), not with the tablet itself.